
What To Do If Your Filter Pump Does Not Work
1. Pump Fails to Start
Cause: Power failure, motor damage, or impeller blockage.
Solution: Check power connections and ensure proper voltage; clean the impeller; replace the motor if damaged.
2. Excessive Pump Noise
Cause: Air entering the system, worn bearings, or loose impeller.
Solution: Check for air leaks in the intake pipe and remove air; replace bearings or tighten the impeller.
3. Insufficient Water Flow
Cause: Underpowered pump, clogged pipes, or dirty filter.
Solution: Verify the pump's power rating; clean the pipes and filter.
4. Pump Leakage
Cause: Worn seals or cracks in the pump housing.
Solution: Replace the seals; if the housing is damaged, replace the pump.
5. Filter Leakage
Cause: Worn seals or cracks in the filter tank.
Solution: Replace the seals; if the tank is damaged, replace the filter.
6. Cloudy Water
Cause: Inefficient filtration or improper chemical treatment.
Solution: Clean or replace the filter cartridge; adjust chemical dosages.

Post time: Mar-08-2025