Starting your pool pump is not as complicated as it seems. In this blog post, we’ll give you a step-by-step guide to starting your pool pump quickly and fixing common issues that may be preventing it from starting.

      Step 1: Check for air leaks
      Air may enter the pump through loose fittings or damaged O-rings. Start by checking all connections between the pool skimmer, pump, and filter. If you find any loose or damaged parts, tighten or replace them accordingly.

      Step 2: Clear any clogs
      Check the pool skimmer and pump basket for debris such as leaves, twigs, or small rocks. If you find any, remove them to allow smoother flow of water.

      Step 3: Fill the pump with water
      First, turn off the pool pump and locate the pump cover, which is usually located on top of the pump. Remove the pump cap and use a hose or bucket to pour water into the pump until it is full. This ensures the impeller is surrounded by water and allows for proper starting.

      Step 4: Restart the pump
      After filling the pump with water, secure the pump cover and turn the pump on. You may hear some air being released initially, but this will soon be replaced by water. Keep an eye on the pressure gauge; when it reaches normal operating range, your pump has successfully started.